Choose your finish with the Superflex Non-woven Abrasive Range

Non-woven abrasives are a three-dimensional web of fibers with globules of resin and abrasives embedded into the network of fibers. Typically, the fibers are nylon or another synthetic material. The abrasive types can range from silicon carbide to aluminum oxide or ceramic alumina.

Some of the main benefits and advantages of non-woven abrasives is that they are waterproof, rinsible and resilient due to their open-mesh construction. Used wet or dry, non-woven abrasive products enable the user to achieve a consistent, uniform finish, and conformability to irregular surfaces, with minimal material removal, smearing and discoloration of the workpiece.
Grinding Techniques – a Tyrolit company, is proud to have launched the Superflex range of non- woven products, available in many different shapes, sizes, and materials dependent on application and whether used by hand or machine.

The non-woven hand pads and rolls are mainly used for cleaning and processing surfaces using orbital sanders or hand-guided grinding. A wide range of specifications offer the user a variety of surface finishing options. The range extends from coarse specifications for cleaning weld seams through to very-fine polishing applications. A consistent finish with proven longevity is guaranteed thanks to the abrasive grain that is impregnated into the entire fleece of the product and not only located on the surface. Flexibility is also ensured by the abrasive fabric that adapts perfectly to the geometry of the workpiece surface.

Should your application require a portable power tool to achieve your desirable finish more timeously, Grinding Techniques offers numerous non-woven products suitable for a 115mm right angle grinder. This product offering includes but is not limited to Superflex Non-Woven Flap discs, Premium Pre-Polish, Polishing discs, and Rough Cleaning discs.
One of the most common challenges when it comes to surface preparation or polishing is getting all the components matched to one another. With Superflex everything you need is available from one source of supply and perfectly matched. With our range of products, you can achieve a mirror finish in only three steps without unwanted burning or discoloration normally caused by overheating.

Superflex Non-Woven Flap discs can be used for various applications on different materials. It removes and blends all rough scratch marks on surfaces. The multi-dimensional flap design reduces clogging and prevents unwanted material discoloration.

To prepare surfaces for polishing, you require a sturdy, high quality product. The Superflex Premium Pre-Polish disc consists of several layers of abrasive fabric ensuring longevity and sturdiness. This allows the disc also to be used for smaller deburring jobs. The ideal operating speed for non-woven abrasive products are typically 60% of the total speed of a 115mm angle grinder but the product has been developed to achieve good results even on non-adjustable speed angle grinders.

Compared to conventional felt discs the Superflex Premium Polish disc is constructed from highly flexible flaps for optimal heat distribution and cool grinding. In doing that the Premium Polish disc avoids undesired discoloration, when used in conjunction with a polishing paste, a perfect mirror finish is achieved on your workpiece. This disc has also specifically been developed to achieve exceptional results even on non-adjustable angle grinders.

When it comes to removing rust, paint, and varnish with the least possible effort or preparing surfaces for welding, soldering, or anodizing, the Superflex Rough Cleaning disc constructed from highly porous nylon fibers, and evenly treated with aggressive abrasives, is able to stand up to any challenge. This disc resists loading or smearing and offers guaranteed longevity with an even scratch pattern, and low heat generation with quiet, stress-free working.

Apart from this, Grinding Techniques also offers an extensive range of Convolute and Unitized Wheels manufactured with the latest technology to provide the desired finish combined with a high tear resistance and exceptional longevity. The main applications for these products are deburring, blending, and finishing of a variety of materials like metals, plastic, and composite materials. Some applications include design objects, surgical instruments, aircraft engines, components of turbines, marine vessel stainless steel and metal parts, chemical and food processing tools and tanks, cutlery and jewelry, hand tools, threaded parts, jet blades and vanes.

Although Unitized and Convolute wheels are similar types of products, they each have important differences, Unitized being smaller in diameter, usually 150mm or less, making them ideal for use on portable power tools, where Convolute wheels, usually 150mm in diameter, or larger, are ideal for stationary or robotic machines. All products are available in several different densities, grit types and grades.

Should you require custom solutions or specifications for certain applications, contact our business development team for more information to suit your requirements.

For more information contact us: 011 271 6400 | info@grindtech.com | www.grindtech.com.

MILLWRIGHT

REFERENCE: ISC ID 325MILL
INTRODUCTION:

Grinding Techniques Pty Ltd is looking for a motivated and committed Millwright.

INTERESTED APPLICANTS WILL BE REQUIRED TO:

Reporting to the Maintenance Manager, you will maintain, troubleshoot, and repair production and facility equipment.

1. Installing various types of industrial and manufacturing equipment.
2. Repairing and maintaining hydraulic, pneumatic and electrical systems.
3. Calibrating and maintaining circuitry.
4. Ensure the correct wiring of power supply to installed equipment and machinery.
5. Inspect electrical equipment regularly to ensure it is operating correctly
6. Reading and interpreting wiring diagrams.
7. Ensure to install wiring of power supply and conduct newly installed equipment and machines.
8. Merger together wires in boxes with different specially developed connectors.
9. Resolve and rectify problems correctly prior to breakdowns occurrence.
10. Periodically inspect electrical equipment to assure it is operating correctly.
11. Ensures work facility fullfill all required safety and environmental needs.
12. Present project oversight as identified by management and engineers.
13. Coordinate climbing and digging permits.
14. Conduct in-depth electrical maintenance and instrumentation for troubleshooting, preventative and repair maintenance duties for plant utility, process and packaging equipment.
15. Perform all multi-discipline duties related to electrical aspect.
16. Maintain equipment documents for every single equipment and review on every modifications.
17. Attain detailed information of OSHA Lock Out Tag Out Process and capability to record all internal paperwork .
18. Install new equipment and modify existing equipment.
19. Conduct scheduled preventative maintenance for every equipment in respective facility.
20. Conduct and support for equipment changeovers and start-ups.
21. Keep generator, lighting, and electrical systems in working order.
22. Diagnose problems and then repair/replace defective parts.
23. Need to act quickly when a breakdown occurs, must be able to tell management whether the problem can be corrected and whether business can continue as usual.
24. If regular activities must be stopped, the electrician will have to estimate how long a shutdown will last.
25. Perform other various tasks as instructed by management.

MINIMUM REQUIREMENTS:

The successful applicant must have:
• Millwright (Red Seal)
• 10+ Years experience as a Millwright within Manufacturing
• Mechanical & Electrical drawings and fault finding.
• Experience in dealing with Variable speed drives
• PLC Programming and Installation experience |(Siemens and LG)
• Hydraulics and Pneumatics experience
• Wireman’s license (if not must be obtained within 6 months of employment)
• Hand’s on as the job will require physical work
• Must be able to adjust and calibrate machines
• MS Office Suite
• Abrasion Industry Experience (Added Advantage)
• Willing to Work Shifts
• Strong verbal and written communication skills
• Ability to make decisions quickly and confidently based on company policies and practices

SOFT SKILLS REQUIREMENT:

• Excellent communication skills, both verbal and written.
• Build collaborative relationships with other Supervisors, Managers, Employees and Departments
• Good organizational skills and the ability to multitask.
• Strong listening skills.
• Ability to prioritize, and manage time efficiently
• Accurate and precise attention to detail
• Hand’s on as the job will require physical work
• Willing to Work Shifts and weekends if required
• Ability to make decisions quickly and confidently based on company policies and practices

The successful applicant must be punctual, have the ability to function as part of a team as well as individually. Integrity, credibility, trustworthiness and professionalism are non-negotiable.

If you do not hear from us within 14 days, please consider your application as unsuccessful.

Submit Your CV: